Description
NEOGEN VIRUQUAT 300
WHY CHOOSE VIRUQUAT 300?
• Residual activity on porous and semi porous hard surfaces
• Non-corrosive on hard surfaces
• Retains activity in the presence of organic matter
• Formulated to overcome hard water conditions
• Economic in use at guided dilutions
• Independently proven efficacy against bacteria, viruses and fungi
• Proven effective against Avian Influenza
• Proven effective against African Swine Fever
• DEFRA approved for Disease of Poultry, General orders and
Foot and Mouth disease
Applications
• Preventative, Terminal and Continuous biosecurity protocols
• Wet spray or foam spray of all hard surfaces in animal housing
• Immersing removable equipment for disinfection
• Boot Dip and Vehicle Disinfection
• Thermal fog as a secondary disinfection (subject to local
regulations)
Area of
disinfection
Dilution Application
General Surface
Disinfection
1:100 to
1:300
Prepare a Viruquat 300 solution diluted at 1:100 to 1:300 and apply at the rate of 300 ml per
square metre as a wet spray or through suitable foaming equipment.
Removable
Equipment
1:300 Immerse in a Viruquat 300 solution diluted at 1:300 for a maximum of 30 minutes, remove, rinse
with clean water and allow to dry before putting back in place.
Boot Dips 1:100 Prepare a Viruquat 300 solution diluted at 1:100. Replace twice per week or when heavily soiled.
Vehicle
Disinfection
1:100 For automated drive-through sprayer system or via pressure washer/knapsack sprayer prepare
a Viruquat 300 solution diluted at 1:100.
Thermal Fog 1:4 Prepare a Viruquat 300 solution diluted at 1:4 applied at 9-10l/1000m2 with associated thermal
fogging equipment, such as pulsFOG K10 or Igeba TF35/TF90. Allow 24 hours before placement
