Description
Farm-Foam EVO is a phosphate free, foaming, alkaline cleaner used for the removal of
organic soils. Farm-Foam EVO is ideal for the removal of faecal material and soil in all
livestock premises, including hatcheries, swine houses and all other animal facilities.
Farm-Foam EVO helps removes dirt, grime, protein, and oils, as well as minerals and
adherent films.
Why choose Farm-Foam EVO?
• Farm-Foam Evo is free from phosphate, glycol ester and chlorine.
• Contains APG (Alkylpolyglycosides) which is a non-ionic surfactant.
• Farm-Foam Evo also contains GLDA (Tetrasodium N,N-bis (carboxylatomethyl)-L-
glutamate), which is a powerful chelating agent made from biodegradable and naturally
occurring raw materials.
• Farm-Foam Evo is easy to apply with excellent foaming capabilities and is easy
to rinse away.
Why use a phosphate free product?
The argument against phosphates in cleaning products occurs around what happens
when a high concentration of phosphorus gathers in a body of water.
While normal levels of phosphorus can act as a nutrient for aquatic life, too much can
cause eutrophication, where the algae in a lake, pond, or stream, overgrows and therefore
limits the amount of oxygen the animal and plant life receives.
This is commonly referred to as an ‘algae bloom’. Essentially algae in the water are over-
fed and grow faster than the water can regulate itself.
Neogen understands this, which is why we have created Farm-Foam Evo to help tackle this
problem. By using an alternative replacement, like Farm-Foam EVO we are contributing
to restoring unnatural phosphate levels as much as possible, ultimately, allowing the
ecosystem to self-regulate.
Application?
Wear appropriate Personal Protective Equipment (PPE).
Foam applications: Use a dilution of 1:100 (100 mL per 10 L of water) and apply using an
appropriate foam generating lance. The foam should be allowed to remain in contact with
the surface for 20-30 minutes. Rinse the area with clean water using a power washer. Allow
to dry before disinfection.
Low pressure spray cleaning: Recommended dilution 1:100 (100 mL per 10 L of water)
depending on level of soiling; heavily soiled areas will require a higher concentration of
solution. When time allows, pre-wet/soak surfaces before applying the prepared detergent
solution. This step will reduce both the water and time consumed during the overall
cleaning process. Apply 250-300 mL/sq m of prepared solution. Rinse the area with clean
water using a power washer. Allow to dry before disinfection.
Manual cleaning and immersion of equipment: Prepare a fresh 1:100 (100 mL per 10 L of
water) solution for soak tank or immersion cleaning. Scrub and rinse thoroughly in clean
water after soaking. Replenish the solution daily.
